Point of Sale Control Settings

• System Administration > System Settings > Customer System Settings > Point of Sale Control Settings

(LOCKED - STORIS access ONLY!) To automatically generate transaction numbers for sales orders, transfers, and other transactions, enter the initial transaction number here. You can enter a maximum of 7 characters at this field. The system assigns the next available number to each new transaction and increments the number by one for new transactions thereafter (provided the number has not already been used in the system). If you leave this field blank, users must manually enter transaction numbers for sales orders and transfers.

If the Automated & Manual POS Numbers in the Warehouse/Store Location Settings is active, the system allows for both system generated and manually entered order numbers.  The Next Transaction Number field must contain a value in order to allow for both types of order numbering.

 If a transaction number contains a lower-case letter, the system transposes it to upper-case.   

(LOCKED - STORIS access ONLY!) To automatically add the warehouse/store location code to transaction numbers during sales order entry, check the box at this field.  Otherwise, leave the field blank.

If you check the box at this field, the system inserts the location code just before the transaction number.  Note that only the base transaction number increments (see the Next Transaction Number field above).  Store location prefixes do not increment.

(LOCKED - STORIS access ONLY!) If you check this box, the system creates a special number for each auto transfer to help you associate the auto transfer with its original transaction. When creating the auto transfer number, the system prepends a "T" to the beginning of the original transaction number and appends the line number from the original order that contained the item that triggered the auto transfer.

For example, if line 2 of sales order 10303 includes an item that triggers an auto transfer, the system assigns to that auto transfer a number of "T103032". If you leave this field blank, the system assigns the next available transaction number to auto transfers.

 Once the system creates an auto transfer for a line item using the above formula, the system assigns the next available transaction number to any additional auto-transfers created for the line item.  The new transaction number does not include a prefix of "T".

This setting applies to sales orders created via Enter a Sales Order and via the web using eBridge. It is also applied to shopping carts created via Enter a Shopping cart and via eRoam. To allow users to enter direct-ship line items on orders and carts, check this box. Otherwise, leave the box blank.

This setting takes precedence over the Direct Ship setting in Advanced Product Settings. In order to set specific products to Allowed or Required at the Direct Ship field in Advanced Product Settings, this global setting must be checked. If this setting is not checked, a product cannot be changed or defaulted as direct ship on a sales order, regardless of the product’s Direct Ship setting in Advanced Product Settings.

To allow users to select direct ship as the delivery method for line items on layaway orders, check the box. Otherwise, leave the box blank. Only one delivery method can be designated for line items on layaways; "split tickets" (assigning different ship methods to line items) are not allowed on layaway orders. Therefore, if you select direct ship for the first line item, all line items on the layaway must also be direct ship until the layaway is converted to a sales order. If this setting is not checked, the Sales Layaway order header cannot be set to direct ship, and no Direct Ship line items may be added to the layaway.

This setting takes precedence over the Direct Ship setting in the Miscellaneous tab of Advanced Product Settings.

This setting applies to quotes created on the web via eBridge, as well as via Enter a Sales Order. To allow users to select direct ship as the line type for line items on sales quotes, check the box.  Leave the box blank if you do not allow direct shipment quotes. Only one delivery method can be designated for line items on quotes; "split tickets" (assigning different ship methods to line items) are not allowed on quote A sales transaction in which a customer receives a documented selling price for specified merchandise in exchange for the customer's contact information. No merchandise is reserved and no deposits are accepted. orders. Therefore, if you select direct ship for the first line item, all line items on the quote must also be direct ship until the quote is converted to a sales order. If this setting is not checked, the Sales Quote order header cannot be set to direct ship, and no Direct Ship line items may be added to the quote.

This setting takes precedence over the Direct Ship setting in the Miscellaneous tab of Advanced Product Settings.

When you complete a direct shipment, the system automatically creates an AP bill for the vendor. If you check this box, the system puts on hold all AP bills created for direct-ship items.

If you check this box, you activate the Hold Code field, at which you must specify the AP hold code you want to associate with direct-ship items.

Select the transaction type you want to appear as default for orders at the "This is a" field in the Enter a Sales Order routine. You have the following options:

• Sales Order

• Layaway Order

• Sales Quote

 You cannot change a layaway A sales transaction in which a customer leaves a deposit to reserve specified merchandise. order to a sales quote, or vice-versa.

Use this field to specify the default order type you want to appear at the Type field when entering a sales order in Sales Order Entry. You can also choose to have no default appear. Click the Arrow button to select one of the following options.

• Delivery

• Customer Pick-Up

• Take-With

• No Default

Use this field to specify the default order type you want to appear at the Type field when entering an exchange in Exchange Processing. You can also choose to have no default appear. Click the Arrow button to select one of the following options.

• Delivery

• Customer Pick-Up

• Take-With

• No Default

Use this field to specify the default order type you want to appear at the Type field when entering a return in the Enter a Return routine. You can also choose to have no default appear. Click the Arrow button to select one of the following options.

• Regular Pick-Up

• Customer Drop-Off

• No Default

Use this field to indicate the default order source to be automatically assigned to new sales orders. Click the Arrow button to select the order source description from a list of existing order sources.  

Use this field to specify your preference for defaulting a ship location for delivery orders.  You have the following options:

• Selling Store -  Order entry processes default the ship location based on the selling location.

• Zip Code Normal Ship Location - Order entry defaults the ship location based on the location associated with the zip code of the delivery address.

• Specific Location - To default a specific location, select this option and then indicate the location code in the field to the right. Click the Search button to search for a location code.

Use this field to specify your preference for a default stock location for delivery orders. Click the arrow to choose from the following options:

• Delivery Ship From (default) - The stock location for deliveries is the same default as the Deliveries -- Ship From Location.

• Same as Selling Store - The stock location for deliveries is the same as the selling store.

• Specific Location - The stock location for delivery orders is a selling store with this specific location. When this option is chosen, the associated entry field becomes active and you can click the Search button to choose a location from the Warehouse Location window. A specific location must be selected in order to save changes to this screen.

Use this field to specify the default pickup location (at the Pick Up At field) for customer pickup orders.  You have the following options:

• Selling Store -  The pickup location is the selling store.

• Delivery Ship From - The pickup location that is associated with the customer's zip code.

• Do Not Default - The pickup location has no default location. This option requires users to specify a pickup location before proceeding to the Merchandise tab in Enter a Sales Order.

• Specific Location - To default a specific location, select this option and then indicate the location code in the field to the right. Click the Search button to search for a location code.

Use this field to specify your preference for a default stock location for customer pickup orders. Click the arrow to choose from the following options:

• Delivery Ship From (default) - The stock location for customer pickups is the same as the Customer Pickups -- Pickup Location.

• Same as Selling Store - The stock location for customer pickups is the same as the selling store.

• Specific Location - The stock location for customer pickup orders is a selling store with this specific location. When this option is chosen, the associated entry field becomes active and you can click the Search button to choose a location from the Warehouse Location window. A specific location must be selected in order to save changes to this screen.

Check this box to require users to enter comments in the Enter a Sales Order process. Once the Save button is clicked when finalizing a sales order, the user is prompted to enter comments in the Enter Additional Comments window. This window does not appear if comments have already been entered in the Additional Comments window accessed through the Actions button on the Customer tab of Enter a Sales Order.

This setting is specific to the order entry processes only. Check this box if you want only the selling store location to determine if a user should have access to sales orders. If this box is checked, users who have access only to Ship or Stock (Regional) locations (via Create a User) cannot access or change an existing sales order. If you leave this box blank, users with access (via Create a User) to the selling store, ship location, or stock location, can access sales orders.

If you want to view the Vendor Model (if one is present) instead of the Product in various processes and screens, check this box.  Otherwise, leave this box blank.  This default is not universal.  Here is how it works:

• If this box is checked, then the view in various processes defaults to vendor model but you have the option to toggle to the product view and vice versa by selecting the Toggle Display of Product in the Actions button.  The processes are: Enter a Sales Order, Enter an Exchange, Enter a Return, Enter a Service Order and Adjust Dollars on a Completed Order.  

• If this box is checked, then the view in various screens defaults to vendor model and you cannot toggle to product view.  The screens are: Sales Margin Scratchpad, Advanced Line Item Display Screen, Costed Line Item Display Screen - Read Only, Group Pricing Screen, Line Item Full Display - Read Only, Line Item Linked Document Display, Schedule Delivery Lines, Additional Line Item Details, and View a Customer's Historical Purchases.

If you check the box at this field, then when a product label is scanned onto a sales order via POS scanning, the line type is automatically set to "T" for Take With on the Merchandise tab of the order. Changes to the line type can then be made manually, if needed. Any lines that are added to the order via POS scan and set to Take With are completed when you save out of the order. The line type for lines that are not scanned default to the line type indicated on the Customer tab or the line type of the last non-scanned, non take-with line, and can be changed manually.  

If you leave this box blank, POS scanned products are assigned line types in the same manner as non-scanned items.  

Use this field to control the prompt for the automatic generation of a refund check, for example from Enter a Return, Enter an Exchange, or Adjust Dollars on a Completed Order. The valid settings for this field are:

• Not an Option (P) - never prompt,

• Prompt the User (1) - always prompt,

• Customer Has No Balance Due (2) - prompt if there is no outstanding AR balance for the customer.

Enter the number of days you want to establish as the Last Activity Days.  The system references this number each time you

• enter a customer account number into an order or

• file (that is, save) an order.

If no payments or purchases exist for the customer within the number of days specified here, the system references the Initial Check and Final Check fields above to determine the course of action.

 If you select Put Order on Credit Hold at the Final Check field, then if a credit check exception occurs at the final check, the system places the sales order on C3 credit hold.

If the Fill Orders on Credit Hold field on the Inventory tab is not active, you must remove all credit holds from sales orders before you can reserve any line items.

Enter the number of days you want to establish as the Past Due Days. The system references this number each time you

• enter an order for a customer with an outstanding A/R balance or

• file (that is, save) an order for such a customer.

If the customer's balance is older than the number of days in this field, the system references the Initial Check and Final Check fields above to determine the course of action.

 If you select Put Order on Credit Hold at the Final Check field, then if a credit check exception occurs at the final check, the system places the sales order on C2 credit hold.

If the Fill Orders on Credit Hold field on the Inventory tab is not active, you must remove all credit holds from sales orders before you can reserve any line items.

When you enter a customer account number into an order, order-entry performs an initial credit check.  The credit check references the Last Activity Days and Past Due Days fields below.  If the customer fails the credit check, the system issues a response based on your entry at this field.  You have the following options:

• Warning Message (I) - when a credit check exception A condition or irregularity recorded by the system. Exceptions can appear in reports, for example, items on a delivery manifest that were not delivered. occurs, issue a warning message but allow users to proceed.

• Do Not Check (1) - do not perform a credit check at initial entry of the customer number.

• Terminate Order (2) - when a credit check exception occurs, terminate the order.

Note that the credit check also searches for a credit limit for the customer.

When you file (that is, Save) a sales order, order-entry performs a final credit check.  The credit check references the Last Activity Days and Past Due Days fields below.  If the customer fails the credit check, the system issues a response based on your entry at this field.  You have the following options:

• Warning Message (F) - when a credit check exception A condition or irregularity recorded by the system. Exceptions can appear in reports, for example, items on a delivery manifest that were not delivered. occurs, issue a warning message but allow users to proceed.

• Do Not Check (1) - do not perform a credit check when you file an order.  

• Put Order on Credit Hold  (2) - When a credit check exception occurs, place the sales order on credit hold.

Enter the number of months you want the system to retain customer data. The system purges customers who, for the number of months specified here, have had no open sales orders and whose A/R balance has been zero. The purge occurs as part of the first End-of-Month process that occurs after the specified time period expires.  If you leave this field blank, the system discards all new order data upon completion of the order.

This field controls all customer information except voided orders.  It purges

• customer records,

• customer history records,

• all completed orders, and

• customer data in the Customer Comments file.

STORIS recommends you set this field to a minimum of 12 months.  Note that once you purge customer data, it is no longer available to processes that reference the data, such as those listed below.  

• Create a Mailing List

• View a Customer's Historical Purchases

• Warranty Processing

For example, if you use Warranty Processing, you should set this field to at least a period matching the longest warranty you offer.  Otherwise, the system will purge the invoice data before its associated warranty expires.

Use this field to automatically calculate a restocking fee during the Enter a Return and Enter an Exchange processes. Entering a value in this field recalculates the restocking fee on new and existing returns and exchanges. Enter a percentage from 0.00 to 100.00%. If this field is left blank (null), the restocking fee is not calculated.

If this field is set to zero, the restocking fee is calculated as zero and requires a user with permission defined in Create a User/Group Actions - Sales Security to change it.

If you check this box, entry of the customer's date of birth is mandatory when you create the customer via Advanced Customer Settings or on-the-fly via the Enter a Sales Order and Enter a Quick Sale.  If you leave this box blank, the customer's date of birth is not a mandatory.

If you create a customer via the Enter a Sales Order or Enter a Quick Sale process, then the Enter Customer's Date of Birth window appears so you can enter this mandatory information.

Check this box to permit a warning to appear when a duplicate email address is entered into the processes listed below. When an email address is entered into any of these processes (except Enter a Shopping Cart), the Customer's Primary Email Address is updated to reflect this change. Since the same email address for more than one customer account is sometimes warranted, the user is permitted to ignore the warning and continue with the update.

• Advanced Customer Settings > General tab

• Update a Customer Address

• Enter a Sales Order > Customer tab > Email Address Entry; also Customer tab > Actions button > Shipping Information

• Enter a Shopping Cart > Print Options

• Import Data > Customer

• Request Credit Information / Credit Application Entry > Personal tab

• Standard Finance Credit Application - Primary - Enabling this setting applies to email address changes throughout the finance credit application process, including primary and co-applicant information as well as to specific finance providers.

Check this box to allow the Search for a Customer screen to appear each time you attempt to create a customer on-the-fly while entering an order. If you leave this box blank, the system goes directly to the Customer Settings routine when creating customers on-the-fly.

Accessing the Search for a Customer screen first can help prevent you from creating duplicate customer records for existing customers. That is, when you enter a name into the Search, the program lists any existing customers with that name.

 When entering a customer name directly into the Customer field, the Search for a Customer screen appears whether or not this setting is checked.

To search for customers by last name only, check the box.

When checked, the Customer Name Information Window does not appear via the Search for a Customer screen. When unchecked, the Customer Name Information Window appears.

Check this setting to default a check mark in the Update Address Information and/or Update Contact Information check boxes in Shipping Information Window when a change is made to the address and/or contact information, respectively. A check in either of these boxes applies the change made in the Shipping Information window to all open orders for that customer.

If this setting is unchecked, the Update Address Information and Update Contact Information check boxes are not checked by default when an update is made to the address or contact information.

Whether or not this setting is checked, you continue to have the ability to check or uncheck the Update Address Information and Update Contact Information check boxes if a change is made in the address and/or contact fields within the Shipping Information window.

This setting applies to new delivery orders and the first time a line changed to delivery on new or existing orders. If you check the box at this field, then when you click the Save button on the payment tab of a sales order or exchange, the Shipping Information window displays. You can use the shipping information window to review and change shipping data for the order before saving and exiting the order. If you leave this check box blank, the shipping information screen does not automatically display, but it can be accessed on the Customer tab of the order using the Actions button.

Specify the method by which to prompt users for ticket printing in Sales Order Entry and Enter an Exchange.  You have the following options:

• Do Not Prompt – no prompt appears. Note that this option deactivates the SALES ORDER ENTRY - Allow completion after print ticket setting in the grid below.

• Deliveries Only – a prompt appears to print delivery tickets.

• Pickups Only - a prompt appears to print pickup tickets.

• Deliveries and Pickups - prompts appear to print both delivery and pickup tickets.

• Security Override - a security override is required.

Use this field to specify preferences for the Report Sales Orders with Delivery Dates in Jeopardy routine. You have the following options at this field:

• All Products - list delivery exceptions for both regular and special order sales orders.

• Stock Products - list delivery exceptions for regular sales orders.

• Special Order Products - list delivery exceptions for special-order sales orders.

When running the End-of-Day process, the system checks the delivery dates of existing open sales orders and net purchase orders against the quantity on hand The total quantity of inventory-type items physically in the warehouse. for each item.  End-of-Day verifies that sufficient quantities are available to satisfy your orders. If you schedule an order and the system determines that stock is not available to reserve Allocate inventory to the line item. to an order, the system generates an exception A condition or irregularity recorded by the system. Exceptions can appear in reports, for example, items on a delivery manifest that were not delivered..  You can list these exceptions via the Report Sales Orders with Delivery Dates in Jeopardy routine.  

Click the Arrow button to select the delivery status to be defaulted on new sales orders and exchanges. This is the value defaulted in the Status field in the Delivery Details section of the Customer tab of the sales order and exchange routines. Select one of the following from the drop-down list: EST (Estimated), SCH (Scheduled), CWC (Customer Will Call) and ASAP (As Soon As Possible).

Once the delivery status is defaulted on the order, you must have permission via your user settings to change the delivery status. If you do not have permission, a security override is required to proceed with the change.

Click the Arrow button to select the pickup status to be defaulted on new sales orders. This is the value defaulted in the Status field in the Pick Up Details section of the Customer tab. Select one of the following from the drop-down list: EST (Estimated), SCH (Scheduled), CWC (Customer Will Call) and ASAP (As Soon As Possible).

Additionally, this default status is used when converting a delivery order to a pickup order when there are no existing pickup lines on the order.

Select one of the following from the drop-down list: EST (Estimated), SCH (Scheduled), CWC (Customer Will Call) and ASAP (As Soon As Possible). This setting applies to sales orders and exchanges.

This setting does not apply to regular returns because they are always set to SCH - Scheduled.

Select one of the following from the drop-down list: EST (Estimated), SCH (Scheduled), CWC (Customer Will Call) and ASAP (As Soon As Possible). When set to CWC, and the pickup lines are linked to a transfer, the transfer is not scheduled and cannot be processed through transfer completion.

This setting does not apply to regular returns or partially completed pick up exchanges because their status is always SCH - Scheduled.

Select the method by which you want to update routing calendars. You have the following options:

• Scheduled - update routing calendars only when the delivery date is scheduled.

• Estimated - update routing calendars with estimated and scheduled orders.

 If you change the selection at this field, a warning message appears regarding the Rebuild Route Calendar process. This must be run in order to save your changes.

Select the condition under which you include items in route capacity quantity calculations. You have the following options:

• Ordered - update route capacities with ordered items that are estimated or scheduled for delivery and therefore have specified delivery dates.

• Reserved - update route capacities only with reserved items estimated or scheduled for delivery and therefore have specified delivery dates. For multiple delivery dates, when updating the route quantity for a specific date, the reserved quantity allocates to each earlier date until the target date is reached.  The system uses the balance of the reserved quantity when the target date is reached up to the delivery quantity for that date when updating the route quantity. If you select this option, any change in the reservations, whether manually by user or automatically by STORIS, affects the Route Capacity Calendars.

If you change the selection at this field, a warning message appears stating that the "Rebuild Route Calendar process will be run" and asking if it is okay to Continue. You must answer Yes if you want to update your change.  

You can use this setting to automatically close routes to scheduling on specific dates, based on the number of days you enter in this field. The field appears in Logistical Route Settings, Service Control Settings, and Point of Sale Control Settings and is used for delivery and service type routes only. If you leave the field blank in the Logistical Route Settings for any delivery/service route, the system uses this field in the Point of Sale Control Settings or Service Control Settings, depending on the route type (delivery/service). Once you enter a number of days in the field, the system uses this number and today's date to determine the dates that should be closed and displays them as unavailable in the route calendar during scheduling.

If you leave this field blank in all three settings routines, this feature is ignored and you can close dates in the normal manner, using Route Capacity Settings and/or Route Capacity Control Settings.

If you use this feature to close dates, they remain closed even if you access this field again and change the number of days. You can "re-open" the closed dates only by doing the following: 1) change the number of days in this field (in control settings and/or route settings) and then 2) access the dates via Route Capacity Settings and change the maximum number of stops for those dates.

You can use this setting to automatically close transfer routes to scheduling on specific dates, based on the number of days you enter in this field. Once you enter a number of days in the field, the system uses this number and today's date to determine the dates that should be closed and displays them as unavailable in the route calendar during scheduling. Enter the number of days prior to the transfer date that transfer routes are to be automatically closed.

You can also use the Cut Off Route ____ Days Prior to Scheduled Date field in Logistical Route Settings to establish a cutoff number of days by route. If you leave that field blank for any routes, the system uses the value in this control setting field, if any.

If you leave the cutoff route days field blank in Logistical Route Settings and in Point of Sale Control Settings, this feature is ignored and you can close dates in the normal manner, using Route Capacity Settings and/or Route Capacity Control Settings.

If you use this feature to close dates, they remain closed even if you access this field again and change the number of days. You can "re-open" the closed dates only by doing the following: 1) change the number of days in this field (in control settings and/or route settings) and then 2) access the dates via Route Capacity Settings and change the maximum number of stops for those dates.

Use this field to specify your delivery calculation method. You have the following options:

• Not Using Delivery Settings and Per Piece Settings - default no delivery charge.

• Using the Delivery Settings Only – default a base delivery charge only.

• Using the Per-Piece Settings Only – default a per-piece delivery charge only.

• Using the Delivery Settings and Per-Piece Settings – default a base delivery charge for each line, then add the per-piece charge to the highest line charge.  The result calculates as the header delivery charge.

Note that to use the per-piece options at this field, per-piece charges must exist in the Per Piece Settings routine.

If you have your account set up to recalculate delivery charges (see next field), you can use this field to indicate whether delivery charges are to be recalculated on an order based on the Delivery Company Settings for the Current Date or the delivery company settings for the Order Date.

If you check the box at this field, the Available to Customer Date (ATC) is the default display on the Merchandise tab of Enter a Sales Order and View an Existing Sales Order. This setting also determines whether the ATC or ATP date displays on the Advanced Line Item Display Screen. When this setting is enabled, the ATC date displays in place of the Available to Promise (ATP) date. The ATC date, as opposed to the ATP date, is calculated based on both merchandise availability and delivery route capacities. If you leave this box blank, the ATP date initially displays on these screens.  

If this setting in addition to at least one other four ATP Calculation settings below are checked, the ATP/ATC dates are calculated and rendered onto the Sales Order and Shopping Cart Enhanced Laser Forms. If this setting and the four ATP Calculation settings below are NOT checked, ATP/ATC date are not calculated and rendered.

If you check the box at this field, the Available to Promise (ATP) calculation includes new purchase orders as a source of supply.  If you leave this box blank, the ATP calculation does not consider new purchase orders.

This field, along with the Include Stock Transfers and Include Unlinked Purchase Orders fields cannot be checked if either of the following is true:

• "DELIVERY DATES – Allow multiple on order line" is checked.

• An order line exists with multiple delivery dates.

This field must be checked if all other ATP Calculation Settings (ATP CALCULATION - Include Stock Transfers, Include Unlinked Purchase Orders) are inactive and “DELIVERY DATES - Restrict based on available date” is active.

Examples:

The following examples are the results that can be expected with this setting when there is insufficient stock and a purchase order is required.

• If a purchase order exists with a date later than the vendor's lead date:

Setting Enabled - the preferred ATP source is a new purchase order because the vendor's lead date is an indication of when a new purchase order can be received.  Since new purchase orders are included in ATP calculation, a new purchase order would produce the earlier ATP date.

Setting Disabled - the preferred ATP source is the existing purchase order.  Since new purchase orders are not included in the ATP calculation, the existing purchase order is selected as the source.

• If a purchase order exits with a date earlier than the vendor's lead date:

Setting Enabled - the preferred ATP source is the existing purchase order.  Although new purchase orders are included in the ATP calculation, the existing purchase order has the better date.

Setting Disabled - the preferred ATP source is the existing purchase order.  Since new purchase orders are not included in the ATP calculation, the existing purchase order is selected as the source.

• If no suitable purchase order exists:

Setting Enabled - the preferred source is a new purchase order.

Setting Disabled - there is no preferred source; the ATP date is not calculated.

 

To include incoming transfers in the ATP calculation, check the box. Otherwise, leave it blank. The default for this field is not checked.

This field, along with the Include New Purchase Orders and Include Unlinked Purchase Orders fields cannot be checked if either of the following is true:

• "DELIVERY DATES – Allow multiple on order line" is checked.

• An order line exists with multiple delivery dates.

This field must be checked if all other ATP Calculation Settings (ATP CALCULATION - Include New Purchase Orders, Include Unlinked Purchase Orders) are inactive and “DELIVERY DATES - Restrict based on available date” is active.

To include purchase orders that are not linked to orders in the calculation of the ATP, check the box. The default for this field is checked. Otherwise, leave the field blank.

This field, along with the Include New Purchase Orders and Include Stock Transfers fields cannot be checked if either of the following is true:

• "DELIVERY DATES – Allow multiple on order line" is checked.

• An order line exists with multiple delivery dates.

This field must be checked if all other ATP Calculation Settings (ATP CALCULATION - Include New Purchase Orders, Include Stock Transfers) are inactive and “DELIVERY DATES - Restrict based on available date” is active.

To calculate the ATP when Retail Part and Service Part Only products are added to an order, check this box.

If you leave the box blank, Retail Part and Service Part Only products do not use the DELIVERY DATES - Restrict Based on Available Date setting (below) and ATP calculations are not performed.

To apply pickup charges to customer returns, check the box at this field.  Otherwise, leave the box blank.  If you check the box at this field, pickup charges calculate for customer returns using the calculation method specified at the Delivery Charge Settings field above.    

  This process creates negative delivery charges (that is, charges due from the customer, not credited to them). For customer returns written against an original document, these pickup charges override any delivery charges that default from the original document. If you leave this box blank, delivery charges from the original document default as a credit to the customer.  

This field does not apply to the Return portion of an Exchange, as a delivery charge is already calculated on the Delivery portion. It also does not apply to the Return which results from a manual split.

To allow users to specify delivery charges for direct-ship items on sales orders, check the box. Otherwise, leave the box blank.  

To prompt users for a reason code when they make a change to a delivery, check this box.  Otherwise, leave the box blank.

 

To activate the Multiple Delivery Dates feature, check the box. Otherwise, leave the box blank. If you check the box, users can specify multiple delivery dates for delivery orders at the line-item level.

 If a check appears at the Daily Auto Release of Stock field on the Inventory tab, this field is inactive.

To allow multiple delivery dates on an order line item, check the box at this field. Otherwise, leave the field blank. In order to check the box at this field, you must also have the "Allow multiple on order" check box selected and the ATP Calculation settings must be inactive.  

If you do not check the box at this field, the field has no affect on order entry processes. If you check the box at this field, you activate the feature that allows you to consolidate the delivery dates of other scheduled orders. When this feature is active,

• and you are creating a new order (sales, return, or exchange), the system checks for other scheduled open orders for the customer.

• When you access the delivery date or pickup date (returns only) on the Customer tab, a message displays indicating that at least one other order is scheduled for that customer.

• The earliest scheduled date from the other order(s) defaults into the current order's delivery or pickup (returns only) date. You can override this date.

• When you click the Save button at the conclusion of the order entry, a prompt appears with an option to reschedule the other order(s).

For further detail, see the following related topics:

• Consolidate Delivery Dates

• Enter an Exchange

• Enter a Return

• Enter a Sales Order

• Orders To Be Scheduled Window

Check this box if you want to be prompted with an option to populate the scheduled delivery date with the latest delivery date from other orders for the customer selected.  Otherwise, leave the box blank.  

 The box at DELIVERY DATES - Consolidate multiple orders must be checked to use this setting.

Check this box if you want to include all orders (backordered, reserved) on the list of orders that can be rescheduled for the customer when a new order is saved.  Otherwise, leave the box blank.  

 The box at DELIVERY DATES - Consolidate multiple orders must be checked to use this setting.

To restrict users from assigning delivery (customer orders and transfers) and pickup dates for out of stock merchandise prior to the Available to Promise (ATP) date, check the box at this field.  Otherwise, leave the field blank.

If you check the box at this field, only users with the proper security can override this restriction.

In order to enable this setting, you must also enable one or more of the following ATP Calculation settings: Include New Purchase Orders; Include Stock Transfers; Include Unlinked Purchase Orders.

This setting does not apply to the following service product types: retail labor, service labor only, service charge, and non-merchandise service.

If you leave the ATP CALCULATION - Applies to Parts setting blank, Retail Part and Service Part Only products do not use this Restrict Based on Available Date setting and ATP calculations are not performed.

To select the delivery or pickup dates on the Customer tab when creating a new sales order, leave this box blank. To prompt for selection of the delivery or pickup date AFTER merchandise is added to a new sales order (via Merchandise tab of order entry), check this box. If you check the box at this field, the Delivery Next/Pickup Date fields are inactive on the Customer tab. Once you enter the products on the Merchandise tab and click to leave that tab, the Select a Fulfillment Date window appears, provided the following conditions exist:

• The order must contain at least one line of merchandise.

• The delivery or pickup status cannot be ASAP or CWC.

• Delivery dates have not been entered for any of the merchandise lines on the order.   

If you check the box at this setting, sales orders and exchanges must have a delivery/pickup date and/or a requested date. If the order's delivery status is CWC or ASAP and this setting is checked, a requested date must be entered on the Customer Order Information Screen, or you must change the status to EST or SCH and specify a delivery/pickup date. If this control setting is not checked, entry of a requested date is optional, regardless of the delivery status of the order.

This field is applicable when processing the following types of orders: sales orders, exchanges, service orders, transfers. If you leave this box blank and assigned inventory is determined to be eligible to be released back into inventory, the inventory is not automatically unassigned. If you check the box at this field, assigned (hard committed) inventory that is eligible to be released back into inventory is automatically unassigned. Once unassigned, the inventory is unreserved from the order. Inventory is disqualified from being unassigned if:

• The inventory is a special order item.

• The inventory is designated As-Is/Floor Sample

• The inventory is already in picking.

Inventory can be automatically unreserved in the following situations:

• The delivery date has changed and is now outside of the auto-fill window, as defined in the Reserve Product Auto Fill Days field on the Inventory tab of Point of Sale Control Settings.  

• The customer pickup date has changed and is no longer within the fill window.

• The order has been put on credit hold and the Fill Orders on Credit Hold setting on the Inventory tab of Point of Sale Control Settings is not enabled.

• The order was changed to an ASAP date status and the Reserve ASAP Sales setting on the General tab of Inventory Control Settings is not enabled.

• The order was changed to a CWC date status and the Reserve CWC Sales setting on the General tab of Inventory Control Settings is not enabled.

To allow users to generate a delivery manifest from the Print Pick List routine, check the box at this field.  Otherwise, leave the field blank. If you check the box at this field, you activate the Update Manifest field in that routine, thus providing the option to generate or update the manifest.

Note that if you leave all of the following fields blank, users must generate delivery and transfer manifests manually.

• Manifests - Allow updates from Delivery Pick List Print

• Manifests - Allow updates from Delivery Ticket Print

• Manifests - Allow updates from Transfer Pick List Print

• Manifests - Allow updates from Transfer Ticket Print

To allow users to generate a delivery manifest from the Print Delivery/Transfer Tickets routine, check the box at this field.  Otherwise, leave the field blank. If you check the box at this field, you activate the Update Manifest field in that routine, thus providing the option to generate or update the manifest.

Note that if you leave all of the following fields blank, users must generate delivery and transfer manifests manually. This field does not affect the Print a Delivery/Pick-Up/Transfer Ticket routine. It only affects the Print Delivery/Transfer Tickets (that is, the multiple ticket print routine) as described above.

• Manifests - Allow updates from Delivery Pick List Print

• Manifests - Allow updates from Delivery Ticket Print

• Manifests - Allow updates from Transfer Pick List Print

• Manifests - Allow updates from Transfer Ticket Print

To allow users to generate a transfer manifest from the Print Pick List routine, check the box at this field.  Otherwise, leave the field blank. If you check the box at this field, you activate the Update Manifest field in that routine, thus providing the option to generate or update the manifest.

Note that if you leave all of the following fields blank, users must generate delivery and transfer manifests manually.

• Manifests - Allow updates from Delivery Pick List Print

• Manifests - Allow updates from Delivery Ticket Print

• Manifests - Allow updates from Transfer Pick List Print

• Manifests - Allow updates from Transfer Ticket Print

To allow users to generate a transfer manifest from the Print Delivery/Transfer Tickets routine, check the box at this field.  Otherwise, leave the field blank. If you check the box at this field, you activate the Update Manifest field in that routine, thus providing the option to generate or update the manifest.

Note that if you leave all of the following fields blank, users must generate delivery and transfer manifests manually. This field does not affect the Print a Delivery/Pick-Up/Transfer Ticket routine. It only affects the Print Delivery/Transfer Tickets (that is, the multiple ticket print routine) as described above.

• Manifests - Allow updates from Delivery Pick List Print

• Manifests - Allow updates from Delivery Ticket Print

• Manifests - Allow updates from Transfer Pick List Print

• Manifests - Allow updates from Transfer Ticket Print

This setting is only used if Route Capacity Quantity (above) is set to Reserved. If this box is checked, then when the system calculates the reserved quantity for sales orders, lines linked to auto-transfers are considered in the calculation. (Upon completion of the auto transfer, the items are assigned to the sales order line.) If you leave this check box blank, the quantity used in capacity calculations does not include lines on the sales order that are linked to auto transfers.

Check this box to allow users to complete sales orders immediately after printing a delivery or pickup ticket in Sales Order Entry. Otherwise, leave the field blank.

Selecting "Do Not Prompt" at the Prompt Ticket Print in Order Entry field on this tab inactivates this field.

This field's functionality requires that Assign Specific Pieces Event located on the Inventory tab be set to "Ticket Print".

In the case of a split ticket, both parts cannot be completed simultaneously. Since "Take With" lines cannot exist in a saved open order, they are completed immediately. The delivery portion would be available for completion afterwards.

To prompt users who attempt to save an order with a delivery status of EST, check the box at this field. Otherwise, leave the box blank.  

If you check the box at this field, then whenever a user attempts to save an order with a delivery status of EST (estimated), a warning prompt appears with the following options:

• OK - return to the General tab and change the delivery status to SCH (scheduled)

• Ignore - save the order without changing the delivery status to SCH  

To prompt users who attempt to save an order with a delivery status of EST, check the box at this field. Otherwise, leave the box blank.  

If you check the box at this field, then whenever a user attempts to save an order with a delivery status of EST (estimated), a warning prompt appears with the following options:

• OK - return to the General tab and change the delivery status to SCH (scheduled)

• Ignore - save the order without changing the delivery status to SCH  

Check this box to indicate that Automatic Delivery Charge Re-Calculation is to take place when changes are made to delivery date, route, and/or status. Leave this box unchecked if delivery charges are not to be recalculated.

 If you check the box at the Delivery Charges - Apply Pickup Charges to Returns field, this field affects the calculation of pickup charges for customer returns.

Check this box to indicate that Automatic Delivery Charge Re-Calculation is to take place when the order is partially completed. Leave this box unchecked if delivery charges are not to be recalculated.

 If you check the box at the Delivery Charges - Apply Pickup Charges to Returns field, this field affects the calculation of pickup charges for customer returns.

Use this field to specify if and how you want to be prompted for the creation of a purchase order from within the sales order and transfer entry processes. This field is used only when the selected product is set up for PO creation via the PO from Order Entry field in the Advanced Product Settings and there is insufficient quantity available to fill the order.  

Click the Arrow button to choose one of the following options:

• Prompt User to Create PO for BO Qty - If you select this option, a window appears asking if you want to create a purchase order. Options are to answer Yes to create a purchase order for the back order quantity (with no option to specify quantity), or No to skip creating a purchase order.

• Allow User to Enter Quantity - If you select this option, the Create a Purchase Order Window appears with the option to create a purchase order and assign a specified quantity to the purchase order.  Note, valid quantity amounts are from one up to and including the quantity sold.

• Do Not Prompt User - If you select this option, no prompt appears asking if you want to create a purchase order. The purchase order is automatically created for the back order quantity.

Use this field to indicate whether to unassign merchandise that is Not Complete and being returned via the Complete the Manifest Process.  You have the following options:

• No - do not automatically unassign "not completed" pieces.

• Prompt - a prompt appears in the Document Detail screen providing the option to unassign "not completed" pieces.

• Yes - automatically unassign "not completed" pieces.

The Add to As-Is Reason Code field on the Pieces Not Completed Detail screen takes priority over the setting in this field.

This field does not affect special-ordered and as-is pieces.

Use this field to specify the point in the sales process when you want the system to assign products to orders. You have the following options:

• Ticket Print - assign when the shipping ticket is printed

• Creating Pick List - assign when the pick list is printed

• Truck Load Process - assign when products are loaded onto a truck for delivery to a customer.

The Truck Load Process option applies only to delivery-type order lines. Assignments for customer-pickup order lines occur during the pickup ticket print process. Additionally, this setting is not available if Route Mapping is active.

The selection you make here may affect your options for creating pick lists.

If you leave this field blank, the system prevents users from creating transfers for which the main warehouse or the regional warehouse is not either the From or To location, whether via the Enter a Transfer routine or via Automatic Transfers.  If you check the box at this field, the system allows such transfers.

 The Main Warehouse field in the Inventory Control Settings indicates your main warehouse, and the Regional Warehouse field in the Region Settings indicates your regional warehouse based on your log-in location.  However, the Allow Store to Store field references the regional warehouse only if Regional Processing is active on your system.

This field does not reference the Location Type Code field in the Warehouse/Store Location Settings.

For auto transfers, STORIS assigns delivery dates based on the Auto Schedule Days field above.  To prevent the system from assigning a delivery date for which a manifest exists for the route and date, check the box at this field.  If you check the box at this field and a manifest exists for the route and date, the system

• increments the transfer date to the next date for which no delivery manifest exists for the route and date and

• displays a message with the new transfer date.  

If you leave this field blank, the system assigns delivery dates to auto-transfers regardless of whether or not a manifest exists for the selected route and date.

This field is used with automatic transfers to calculate transfer dates. Enter the number of days before the sales order delivery date that you want the system to perform Automatic Stock Transfers.  If you enter a response at this field, the system generates an Automatic Stock Transfer document whenever the stock location on a sales order delivery differs from the ship-from location.  If you leave this field blank, the system does not create automatic transfers.

The system uses the following formula to calculate automatic transfer dates:

Transfer Date = Sales Order Delivery Date (EST or SCH) - Auto Schedule Days

For example, if the sales order delivery date is 4/6 and the Auto Schedule Days is set to 3, the transfer date calculates as 4/3. Note that if the auto transfer date calculates to a past date, the system schedules the transfer for the current day.

If you enter a response here, you activate the Inter-Regional Auto Transfers feature.  If this feature is active, the End-of Day (EOD) process references this field when d etermining whether to delete auto transfers created by the Inter-Regional Auto Transfers feature.  

If Inter-Regional Auto Transfers is active, the order entry process may create an auto-transfer if insufficient quantity exists at the stock location.  EOD then examines incoming purchase orders associated with the ship-from location to see if sufficient merchandise will arrive in time. If so, the auto transfer becomes unnecessary and thus eligible for deletion.

Before deleting the auto transfer, EOD references this field. If the number of days before the scheduled delivery date is less than the number of days specified at this field, EOD deletes the auto transfer.  If you leave this field blank, the End-of-Day process does not delete auto transfers.

Use this setting to establish multi-legged transfer lead days that are used to calculate the schedule date of multi-legged transfers. If you do not process multi-legged transfers, leave this field blank. If you process multi-legged transfers, enter the number of lead days (0-99) in this field.

The Auto Schedule Days field (above) is used by the auto-transfer process to calculate the schedule date of the auto-transfer created from the store’s primary distribution location.

• If you entered a number in this field, the system determines the schedule date of the multi-legged transfer by taking the schedule date of the auto-transfer, minus the multi-legged transfer lead days. 

• If an auto-transfer was not created because the order is being shipped from the primary distribution center, the schedule date of the multi-legged transfer is determined by taking the order’s schedule date, minus the multi-legged transfer lead days.

• If the scheduled date of the multi-legged transfer is calculated to be earlier than the current date, the current date is used as the schedule date of the transfer.

Select the method by which to sort reports. You have the following options:

• Vendor Model Number

• STORIS SKU (stock-keeping unit) a unique number or code that distinguishes each product and service provided by a supplier. Number

If Vendor Model is selected at this field, but the Product record does not contain the vendor model number, the report displays the product information using the SKU/product number followed by two asterisks (**) to indicate that the vendor model number was not available.  

To enable the Just-In-Time Inventory feature for orders on AR credit hold, check the box at this field. If you leave the box empty, then to reserve items on a sales order on credit hold you must either

• manually reserve the items or

• remove the credit hold and thus enable Just-In-Time Inventory processing for the order.

See Also: Auto-Fill Days

Use this field to control how exchanges behave with respect to reservation of inventory.

• If you check the box at this field, the system does NOT automatically review reservations when the credit hold status or delivery date changes.  If the delivery date falls outside the auto-fill days, the system does not change the reservation.  If the credit hold is approved, the items do not automatically reserve.

• If you leave the box blank at this field, the system reviews reservations for exchanges in the same manner as with sales orders, and reserves goods accordingly.

To activate the Auto Stock Release feature, check the box at this field.  Otherwise, leave the field blank.  If you check the box at this field, the Auto Stock Release process runs as part of the End of Day process.

This field is inactive if a check appears at any of the following fields:

• DELIVERY DATES - Allow multiple on order in the selection grid on the Logistics tab of this process

• DELIVERY DATES - Allow multiple on order line in the selection grid on the Logistics tab of this process

• Reserve ASAP Sales on the General tab of Inventory Control Settings

• Reserve CWC Sales on the General tab of Inventory Control Settings

To allow users to edit soft kit components on sales orders, check the box.  If you leave this box blank, users

• can only delete soft kits on sales orders, and

• require a security override to access the Group Pricing Screen.

To allow selected users to override these restrictions, use the Override soft kit restrictions field in the Extended Security settings.

To automatically prorate the price of a return warranty, check this box.  Otherwise, leave this box blank.

When this box is checked and the returned product is linked to a warranty, the Enter a Return and Enter an Exchange processes calculate a prorated return price for warranties, which is based on the warranty term and the period of time that has elapsed since the warranty was activated.  

When this setting is enabled, the system calculates the prorated price as follows.

(Today's Date - Warranty Start Date) / Total Warranty duration days = Prorate Percentage

Price - (Price * Prorate Percentage) = Prorated Price

Use this field to specify the method by which to calculate prices for soft kit masters whose Source of Price is set to Product.  If you check the box at this field, the system uses the total of the prices derived from the pricing hierarchy for all components in the kit.  If you leave this box blank, the system uses the total of the prices in the Default Kit Selling Price field in the Advanced Product Settings for all components in the kit.  

 Depending on your pricing setup, the price selected by the pricing hierarchy may not be the lowest price specified for a product in the various price fields in the system.

This setting is required if you apply discounts to the order subtotal via discount codes and/or as an additional amount/percent. The field is used only if one (or both) of the Apply Discount Codes to Subtotal and Apply Additional Amount or Percent to Subtotal (DISCOUNTS) fields is checked.  

• Enter the maximum discount percentage rate that can be applied to an order subtotal during order entry.

• Once you indicate this maximum, the system ensures that the total discount percentage applied to the merchandise subtotal amount, including both types of subtotal discounts (additional amount/percent discount and discount codes), does not exceed the maximum percent established.

• If you apply discounts to orders by adjusting the subtotal amount, leave this field blank or enter zero.

 You can also establish a maximum subtotal discount percent by location. Use the Maximum Subtotal Discount % field in Warehouse/Store Location Settings for each location where you want to establish a different maximum. During sales transaction entry, the system checks the Warehouse/Store Location Settings first, and uses the setting there if not blank. Otherwise, the setting in this field is used.

For users reducing the selling price of a product on a sales order, enter the maximum percentage of the selling price you want to allow users to vary from the selling price established in the Advanced Product Settings.   If the modified price is less than the selling price by a percentage greater than the percentage you enter here, the system may generate an alert record, depending on the setting at the Price Exceeds Variance Alert field below.  

 You can also specify price variance percentages by location via the Settings tab in the Warehouse/Store Location Settings. If a price variance percent has been specified for the selling location on an order, that setting overrides the setting entered here.

Specify the type of alert you want the system to issue when a user modifies the price of a sales order line item so that the new price exceeds the allowable price variance specified at the Price Variance Percent field above.  Click here for a list of options.  

 You can also specify price variance percentages by location via the Settings tab in the Warehouse/Store Location Settings. If a price variance percent has been specified for the selling location on an order, that setting overrides the setting entered here.

Use this field to require a reason code regardless of the alert level selected and the user's access. If you check this box, entry of a reason code is always required when there is an override to the selling price and the established variance percent has been exceeded. This occurs regardless of the user's sales security setting "Override POS exception rules" and the Variance Exceeded Alert level selected on this screen. When this box is checked, reason codes entered for each price variance exception appear on the Variance from Retail report, which runs as part of the Generate Daily Reports process.

You can also establish the reason required setting by location via Warehouse/Store Location Settings. The system checks the location first and if the box at that setting is blank, it uses the global settings established here.

To require entry of a comment when a price variance exception for this product occurs, check this box. Otherwise, leave this box blank. This comment can be viewed in the Enter Exception Comments window via the order entry routine by selecting View/Edit Exception Comments from the Actions button on the Merchandise tab. The comment entered is associated with the entire order, and not with a particular line.

Price variance checks are performed on the line item price, modified order subtotal, and within group pricing. If you leave the Price Variance % field blank, this check box must also be blank.

(LOCKED FIELD - STORIS Access Only) Use this field to specify the method you want to use to establish and maintain product pricing. You have the following options:

• Product - use the Price-Spiff-Commission Table

• Store - use  Level Pricing

Use this field to specify the method by which to calculate commissions. Click the Arrow button to select one of the following options:

• None - No commission calculation.

• Customer Matrix - Select this method to calculate commissions as a percentage of the selling price or gross profit, based upon the customer, product, or salesperson. The Commission Matrix uses two factors to determine commission values: a calculation code (percentage of price or profit) and a source code (customer, product, salesperson, or flat rate). See the Commission Settings for further detail.

• Salesperson Matrix - If you select this method, commissions are calculated using variable rates by salesperson. The rate is obtained based on the product commission and salesperson commission categories in your Commission Settings. You can define different commission rates based on the salesperson's level (e.g. regular, senior, manager) by adding commission matrix records per salesperson commission category. You can also define a variable rate table based on the gross margin percentage earned for a line item.   

• Gross Profit - This method uses the Low & High Limit Percent and the Low & High Commission Percent to calculate commissions. These attributes are reserved in the Point of Sale Control Settings for all sales, customers, and products. The program calculates commissions using the gross profit margin and the gross profit dollars from each sale, according to the limits and commission percentages set. In essence, it creates a double sliding scale that produces a ratio that is the commission percentage.

When you select this option, the Commission Calculation screen appears in which you can enter or modify these attributes.  You can also access that screen via the Action button next to the Calculation Method field.

Use this field to specify the method by which to calculate commissions for delivery charges, delivery credits, and delivery charge adjustments. You have the following options:

• None - create no delivery charge commissions.  This selection clears and deactivates the % Commissions and % Cost Factor fields below.   

• Revenue - calculate delivery commissions as a percentage of the delivery charge using the following formula:

Delivery Charge * % Commission

This selection activates the % Commission field and deactivates the % Cost Factor field below.  

• Profit - calculate delivery commissions based on predefined profit calculations using the following formula:

(Delivery Charge – (Calculated Delivery Charge * % Cost Factor)) * % Commission

This selection activates the % Commission and % Cost Factor fields below.

 To generate delivery charge commissions, you must be set up to default delivery charges.

To report on

    - delivery commissions with line item commission data, use the sales commission reports.  

    - delivery commission exceptions, use the Delivery Commission Exceptions report in the Report Builder.

The following do not create delivery commission records:

    - Returns, exchanges, and dollars-only adjustments that are not against an original invoice.

    - Returns you create with pickup charges (not delivery charge credits) do not create delivery commission records.

Calculated delivery charges for returns, exchanges, and dollars-only adjustments prorate based on the delivery charge on the original order, not the delivery charge refunded on the return/exchange/adjustment.

Specify the way in which to default salespersons onto sales orders.  You have the following options:

• In Customer Settings – default the salespersons associated (if any) with the customer at the Salesperson 1 and Salesperson 2 fields on the Point of Sale tab in the Advanced Customer Settings.  If no default salespersons exist for the customer, default the house “ZZZ” salesperson.

• The Current User – default the current user.  If the user is not a salesperson, default the house “ZZZ” salesperson.

• Not to be Defaulted – Do no default a salesperson (that is, require users to manually provide a salesperson code during order entry).

 Users with access at the Override Commission Rules field in the Extended Security (Sales) settings can override the functionality of this field.

For Quick Sales, this field works in conjunction with the Allow Entry of Salesperson field in the Quick Sale Control Settings to determine whether a salesperson code defaults or not.

Select the method by which to print the Sales Commissions report. You have the following options:

• Profit Margin - print by gross profit margin

• Customer Name - print by customer name (replaces the cost/margin fields with customer name)

Enter the number of days you want the system to retain salesman commission data before purging as part of the Generate Daily Reports process. Enter a number between 0 and 999. STORIS recommends setting this to at least 31 days.

If calculating delivery commissions based on profit (that is, if you select Profit at the On Delivery Charge field above) and you check the box at this field, then whenever a user overrides the Delivery Charge field in order entry with an amount greater than the default charge, the system still calculates delivery commissions using the default delivery charge (that is, limits delivery commissions).

To split commissions evenly on orders with multiple salespersons, check the box at this field. Otherwise, leave the field blank. When a rounding error requires an uneven split, the system allows a .01% difference for any of the listed salespeople.  Note that users with access at the Override Commission Rules field in the Extended Security (Sales) settings can override the functionality of this field.

To update written business as part of the commissions update process, check the box at this field.  If you leave the box blank, only delivered business updates as part of the commission update process. Note that users with access at the Override Commission Rules field in the Extended Security (Sales) settings can override the functionality of this field.

To assign the user who is creating the order as one of the specified salespeople for new orders, check the box at this field. Otherwise, leave the field blank. If you check the box at this field and the user creating the order is not set up as a salesperson, the user must assign the house salesperson (ZZZ) to the order. Note that users with access at the Override Commission Rules field in the Extended Security (Sales) settings can override the functionality of this field.

If this box is checked, the salesperson on the new sale portion of an exchange is automatically set to the same value as the salesperson on the return portion of an exchange.  

With this check box activated, the following occurs:

• The Salespeople for New Sales extra action is inactive on the customer tab of the Enter an Exchange screen.  

• The Exchange Salesperson field on the Customer Order Information Screen is inactive.

To apply discounts to line item prices via entry of discount codes on the Merchandise tab of order entry, check this box. If this box is checked, the Discount field on the Merchandise tab of order entry is activated.

If the box is not checked, the Discount field is inactive and you cannot enter this type of discount.

 If you check this box, you cannot check the box at the Apply to Order by Adjusting Subtotal Amount field.

To discount line item prices by adjusting the subtotal amount on the Payment tab of order entry, check this box. With this type of discount, the line items are re-priced to total the newly adjusted subtotal amount. If the box is checked at this field, the Subtotal amount on the Payment tab of order entry is active.

If the box is not checked, the Subtotal amount is not available for edit and you cannot enter this type of discount.

 If you check this box, you cannot check the box at the Apply Discount Codes to Individual Line Items field.  

To apply discounts to the order subtotal via discount codes entered on the Payment tab of order entry, check this box. If this box is checked, the Discounts - Codes field is active on the Payment tab of order entry. This type of discount is applied to the order subtotal, rather than individual line items.

If the box is not checked, the Discounts - Codes field is not active and you cannot enter this type of discount.  

To apply an additional discount to the subtotal amount as a dollar amount or percentage in order entry, check this box. If this box is checked, the Additional $ / % field on the Payment tab of order entry is active. This type of discount does not affect line item prices; the discount amount is subtracted from the subtotal of the order.

If the box is not checked, the Additional $ % field is inactive and you cannot enter this type of discount.  

(LOCKED - STORIS access ONLY!) This setting applies only to coded discounts to the subtotal amount entered at the Code(s) field on the Payment tab of order entry. To have the system apply all fixed amount discounts first and then apply percentage discounts, this box must be checked. Each discount is applied to the net subtotal resulting from the application of the previous discount.

If this box is not checked, all percentage discounts are applied first and then fixed amount discounts are applied.

Discounts to the subtotal entered as an additional amount/percent (Additional field on Payment tab) are always applied last, after coded discounts are applied.  

This setting applies to line discounts only and is not STORIS locked. If you check the box at this field, all dollar discounts are subtracted from the merchandise subtotal before percentage discounts are applied. If you leave the box blank, all percentage discounts are applied to the order line before dollar discounts are subtracted.

If you check this box, the Auto-Apply feature can be started from within sales order and quick sale entry. If there is a Daily Discount Schedule for the order date, you can select the Start Automated Line Discounting option from the Actions menu in order entry to start the Auto-Apply process. The Auto-Apply feature automatically adds sales discounts to the order based on the discount schedule for that day.

If you check this box, then when you manually add a new discount via the Enter Discounts on Multiple Lines process or via Auto-Apply, the process automatically defaults the discount to the order lines in a manner that is most beneficial for the customer. If the discount has specific restrictions making it applicable to only specific lines, the process applies the discount in a manner that gives the customer the best possible discount. If the Automatically Apply Discounts Using Daily Discount Schedule field (above) is enabled, this field must also be checked.

Check this field in order to reduce the subtotal discount(s) to match the order's subtotal, which is useful in the event that the subtotal discount amount exceeds the order's subtotal. This field is unchecked by default. To use this field, the Maximum Subtotal Discount % field in the above Pricing section must be set to 100%.

If this setting is checked, a prompt confirms the subtotal reduction for each discount applied. You can choose Yes at the prompt, in which case the subtotal discount is reduced; or you can choose No at the prompt, in which case you need to manually make the appropriate modifications. Subtotal discounts are reduced beginning with the last discount entered.

An additional manual discount (percentage or amount) can still be applied when this setting is checked, and is considered first if an adjustment to the subtotal is required as per this setting.

This setting only applies to the original open order. This setting does not apply to orders that have been partially completed, even if new discounts are applied. In this case, the subtotal discount(s) would have to be removed or the subtotal amount would have to be increased.

If you check this box, then when the Daily Discount Schedule contains a discount that is set as either Apply to Additional Item of Equal or Greater Value (BOGO) or Apply to Additional Purchases, the ordered quantity on the sales order displays as individual sales order lines each with a quantity of 1. For example, if a product with a quantity of 3 is entered, the sales order grid populates with 3 sales order lines, each with a quantity of 1.

Validation applies to each line of the order as if entered individually, meaning all pop-up messages, alerts, and options are repeated as each line is added to the order. As such, if any linkable warranties exist and the  Warranty Category Settings is set to Do Not Display, the Warranty Linkage Selection window opens for each applicable line.

To allow a discount to be applied to a sales order by adjusting the net total of the order, activate this field. Otherwise, leave the check box blank. If this box is checked, you can click the Action button at the Net Total field in sales order entry to access the Adjust the Net Total screen. Users with the proper security (Change the Net Total on Sales Orders) can use this screen to change the net total amount.

Use this setting to control how pricing is handled when a single soft kit component is removed from an order or the quantity is adjusted, resulting in an alteration to the kit composition.

If you check this box, then when you either remove a soft kit component from an order or change a component's quantity on the order, a warning is issued asking if you wish to continue with this change. If you choose to continue, the soft kit grouping is removed and selling prices for the components are recalculated using the existing pricing hierarchy for each product individually. An order comment is also created, logging the reason for the price change of each component.

If you leave this check box blank, and you remove a soft kit component or change the quantity on the order, selling prices of the components remain unchanged.

Use this setting to enable or disable the Quantity prompt in Enter a Sales Order, Enter an Exchange and Enter a Quick Sale when a Soft Kit is added to the order. If you check the box at this setting, then when you add a soft kit with a quantity greater than 1 to the order, its components are added to the order with the quantity of each component line item multiplied by the value you specified in the quantity prompt. If you leave this setting blank, the Quantity prompt is inactive and you cannot change it.

Use this field to enter the global minimum gross profit percentage (if any) you want to maintain for sales order line items whose default selling price is changed during sales order entry.  If the edited price does not meet the minimum gross profit percentage, the system may issue an exception A condition or irregularity recorded by the system. Exceptions can appear in reports, for example, items on a delivery manifest that were not delivered. alert (see the Minimum Not Met Alert field below).  

 This is a global setting. You can also specify minimum gross profit percentages at the product level and the store location level, and those settings override the global setting you specify here.

Click the Arrow button to specify the global check level for minimum gross profit. This field determines system response to sales order line items whose selling price does not meet the minimum gross profit percentage.  

 This is a global setting. You can also specify check levels at the store location level.  That setting overrides the global setting you specify here.

Click the Arrow button to specify the type of alert you want the system to issue when a user changes the selling price of a sales order line item so that the price is below the cost of the product. Choose one of the following options.

To specify this alert by warehouse/store location, go to the Sell Price is Below Cost field on the Advanced tab in the Warehouse/Store Location Settings.

This option controls the costing method used in the Sales Margin Scratchpad.  Click the Arrow button to specify one of the following options:

• Average Cost

• Replacement Cost

• Whichever Cost Is Greater

This option controls the display of profit figures on the Executive Flash inquiry. You have the following options:

• None - do not display profit figures  

• Dollars - display the profit figures in dollars

• Percent - display profit figures in percentages

To default the Print check box on the Print Options Window to checked when you initially access that window, check this box. To leave the print option check box blank when you access the print options window, leave this check box blank.  

To default the E-mail check box on the Print Options Window to checked when you initially access that window, check this box. To leave the email option check box blank when you access the print options window, leave this check box blank.

If you check this box, customer pickup tickets can only be generated for orders with a scheduled pickup date equal to the current system date. A checked box at this field overrides the Delivery Lead Days setting on the Inventory tab of this control settings screen.

If you leave this box blank (default setting), pickup tickets can be printed within the Delivery Lead Days.

Use this field to specify the type of receipt, if any, you want to print at the conclusion of a cash posting session.  You have the following options:

• Form - Regular STORIS print forms

• Laser - Regular STORIS print forms printed on a laser printer

• Forms Designer - A form called PAYMENT RECEIPT printed via the Forms Designer

• No Receipt - Do not print receipts from this routine

If you choose one of the print options, a prompt appears at the conclusion of the payment with the option to print or skip the print.  If you choose No Receipt, no prompt appears at the conclusion of the payment.

 Receipts print for all Enter a Customer Payment/Refund/Gift Certificate payments except previous deposits.  That is, if entering a deposit for an existing order, the program prints the sales order instead of a receipt and includes the new deposit as part of the total deposits for the order.

Select this check box to require user to provide an ID and password in order to access the Enter a Sales Order, Enter a Quick Sale, and Enter a Service Order processes.

Select this check box to require user to provide an ID and password in order to access the Exchange process.

Select this check box to require user to provide an ID and password in order to access the Return process.

Select this check box to require user to provide an ID and password in order to access the Sales Adjustment process.

Use this field to add another level of control regarding the backdating of sales transaction completions. This applies to sales orders, exchanges, returns, and dollar adjustments to completed orders. To define how many days into the past you can backdate the completion of a sales transaction, enter a number from 0-61.

• If you set this field to zero (0), the ability to backdate the completion depends only on your sales security setting, Change a transaction’s completion date field. You can backdate the completion to any date in an open sales month provided you have permission via the sales security setting or have obtained an override from another user.

• If you enter a number of days in this control setting, you can backdate sales transaction completions up to and including this number of days without obtaining override permission, regardless of your user level setting. When you attempt to backdate a completion for a number of days greater than this control setting, you must either have permission via your own user level setting, or you must obtain override permission from an authorized user.  

Check the box at this field if you want users to enter a reason code when they delete one or more lines from an existing transaction (including sales orders, layaways or exchanges).  Otherwise, leave the box blank.

This field is used as the default setting for the Validate Tax Rate field in Sales Tax Settings when new tax jurisdictions are created. The Validate Tax Rate field determines whether the system checks and recalculates sales tax on open sales orders.

Check the box at this control setting field if you want all new jurisdictions to be initially set to validate the tax rate. If you do not check the box at this field, jurisdictions are initially set to not validate and recalculate taxes.

Regardless of the initial default setting, individual tax jurisdictions can be set to validate or not validate by checking or un-checking the Validate Tax Rate field in the Sales Tax Settings.

Use this field to control how the system re-checks sales orders for exceptions. You have the following options:

• Never - the report lists all exceptions whether or not they have been resolved at the time of printing.

• At End-of-Day Reporting - runs the Exception Report when you perform end-of-day processing and lists only unresolved transactions.

• Printing Reports On Demand - the system lists only unresolved transactions when you run any Sales Order Exceptions report (located on the Sales Order reports menu).

• Always - tells the system to recheck for exceptions each time the report is run and each time a sales order is re-opened.

Use this field to specify your preferences for entering marketing codes at the Marketing Information - Code 1 field in the Enter a Sales Order routine. You have the following options:

• Optional - the Code 1 field in Sales Order Entry is active but not mandatory.

• Mandatory - the Code 1 field in Sales Order Entry is active and mandatory.

• None - the Code 1 field in Sales Order Entry is inactive.

Use this field to specify your preferences for entering marketing codes at the Marketing Information - Code 2 field in the Enter a Sales Order routine. You have the following options:

• Optional - the Code 2 field in Sales Order Entry is active but not mandatory.

• Mandatory - the Code 2 field in Sales Order Entry is active and mandatory.

• None - the Code 2 field in Sales Order Entry is inactive.

 The options available at this field depend on the setting at the First Marketing Code field. If the First Marketing Code field is set to:

    - Optional, only the Optional and None options are available at this field.
    - Mandatory, all options are available at this field.
    - None, the system sets this field to None and you cannot edit it.
 

Use this field to enter a default customer email address. If you enter a valid email address at this field,

• it becomes the default customer email address for your system,

• the Email Address field in the Customer Settings becomes a required field, and

• the order entry processes require customers to have a valid email address.  

If customer email addresses are required in your system (defined at the Default Email Address field above), this field is active. To default the above email address whenever the system requires one, check the box at this field. Users can override the default. To require users to manually enter a valid email address whenever the system requires one, leave this field blank.

If you check this box, then...

• when entering a new customer, if you save the record without providing a customer email address, the system automatically adds the default email address to the customer record.

• when entering an order for a customer with the default email address, the Email Address Entry Screen appears, displaying the default email address.  To continue, you must either accept the default email address or enter a different email address.  The system updates the Customer Settings with your entry upon saving the order.  

If you leave this box blank and you entered a Default Email Address above, then...

• when entering a new customer, if you attempt to save the record without providing a customer email address, an error message appears and the program requires you enter a unique email address before you can save the record.

• when entering an order for a customer, the Email Address Entry Screen appears. To continue, you must enter a valid email address. The system updates the Customer Settings with your entry upon saving the order.